Graybyt3 Was Here

Linux cloud.locucionar.com 3.10.0-1160.81.1.el7.x86_64 #1 SMP Fri Dec 16 17:29:43 UTC 2022 x86_64
Apache
91.191.211.241

Utils.pm

package CPANPLUS::Internals::Utils;

use strict;

use CPANPLUS::Error;
use CPANPLUS::Internals::Constants;

use Cwd                         qw[chdir cwd];
use File::Copy;
use Params::Check               qw[check];
use Module::Load::Conditional   qw[can_load];
use Locale::Maketext::Simple    Class => 'CPANPLUS', Style => 'gettext';
use version;

use vars qw[$VERSION];
$VERSION = "0.9138";

local $Params::Check::VERBOSE = 1;

=pod

=head1 NAME

CPANPLUS::Internals::Utils - convenience functions for CPANPLUS

=head1 SYNOPSIS

my $bool = $cb->_mkdir( dir => 'blah' );
    my $bool = $cb->_chdir( dir => 'blah' );
    my $bool = $cb->_rmdir( dir => 'blah' );

my $bool = $cb->_move( from => '/some/file', to => '/other/file' );
    my $bool = $cb->_move( from => '/some/dir',  to => '/other/dir' );

my $cont = $cb->_get_file_contents( file => '/path/to/file' );

my $version = $cb->_perl_version( perl => $^X );

=head1 DESCRIPTION

C<CPANPLUS::Internals::Utils> holds a few convenience functions for
CPANPLUS libraries.

=head1 METHODS

=head2 $cb->_mkdir( dir => '/some/dir' )

C<_mkdir> creates a full path to a directory.

Returns true on success, false on failure.

=cut

sub _mkdir {
    my $self = shift;

my %hash = @_;

my $tmpl = {
        dir     => { required => 1 },
    };

my $args = check( $tmpl, \%hash ) or (
        error(loc( Params::Check->last_error ) ), return
    );

unless( can_load( modules => { 'File::Path' => 0.0 } ) ) {
        error( loc("Could not use File::Path! This module should be core!") );
        return;
    }

eval { File::Path::mkpath($args->{dir}) };

if($@) {
        chomp($@);
        error(loc(qq[Could not create directory '%1': %2], $args->{dir}, $@ ));
        return;
    }

return 1;
}

=pod

=head2 $cb->_chdir( dir => '/some/dir' )

C<_chdir> changes directory to a dir.

Returns true on success, false on failure.

=cut

sub _chdir {
    my $self = shift;
    my %hash = @_;

my $tmpl = {
        dir     => { required => 1, allow => DIR_EXISTS },
    };

my $args = check( $tmpl, \%hash ) or return;

unless( chdir $args->{dir} ) {
        error( loc(q[Could not chdir into '%1'], $args->{dir}) );
        return;
    }

return 1;
}

=pod

=head2 $cb->_rmdir( dir => '/some/dir' );

Removes a directory completely, even if it is non-empty.

Returns true on success, false on failure.

=cut

sub _rmdir {
    my $self = shift;
    my %hash = @_;

my $tmpl = {
        dir     => { required => 1, allow => IS_DIR },
    };

my $args = check( $tmpl, \%hash ) or return;

unless( can_load( modules => { 'File::Path' => 0.0 } ) ) {
        error( loc("Could not use File::Path! This module should be core!") );
        return;
    }

eval { File::Path::rmtree($args->{dir}) };

if($@) {
        chomp($@);
        error(loc(qq[Could not delete directory '%1': %2], $args->{dir}, $@ ));
        return;
    }

return 1;
}

=pod

=head2 $cb->_perl_version ( perl => 'some/perl/binary' );

C<_perl_version> returns the version of a certain perl binary.
It does this by actually running a command.

Returns the perl version on success and false on failure.

=cut

sub _perl_version {
    my $self = shift;
    my %hash = @_;

my $perl;
    my $tmpl = {
        perl    => { required => 1, store => \$perl },
    };

check( $tmpl, \%hash ) or return;

my $perl_version;
    ### special perl, or the one we are running under?
    if( $perl eq $^X ) {
        ### just load the config
        require Config;
        $perl_version = $Config::Config{version};

} else {
        my $cmd  = $perl .
                ' -MConfig -eprint+Config::config_vars+version';
        ($perl_version) = (`$cmd` =~ /version='(.*)'/);
    }

return $perl_version if defined $perl_version;
    return;
}

=pod

=head2 $cb->_version_to_number( version => $version );

Returns a proper module version, or '0.0' if none was available.

=cut

sub _version_to_number {
    my $self = shift;
    my %hash = @_;

my $version;
    my $tmpl = {
        version => { default => '0.0', store => \$version },
    };

check( $tmpl, \%hash ) or return;

$version =~ s!_!!g; # *sigh*
    return $version if $version =~ /^\d*(?:\.\d+)?$/;
    if ( my ($vers) = $version =~ /^(v?\d+(?:\.\d+(?:\.\d+)?)?)/ ) {
      return eval { version->parse($vers)->numify };
    }
    return '0.0';
}

=pod

=head2 $cb->_whoami

Returns the name of the subroutine you're currently in.

=cut

sub _whoami { my $name = (caller 1)[3]; $name =~ s/.+:://; $name }

=pod

=head2 _get_file_contents( file => $file );

Returns the contents of a file

=cut

sub _get_file_contents {
    my $self = shift;
    my %hash = @_;

my $file;
    my $tmpl = {
        file => { required => 1, store => \$file }
    };

check( $tmpl, \%hash ) or return;

my $fh = OPEN_FILE->($file) or return;
    my $contents = do { local $/; <$fh> };

return $contents;
}

=pod

=head2 $cb->_move( from => $file|$dir, to => $target );

Moves a file or directory to the target.

Returns true on success, false on failure.

=cut

sub _move {
    my $self = shift;
    my %hash = @_;

my $from; my $to;
    my $tmpl = {
        file    => { required => 1, allow => [IS_FILE,IS_DIR],
                        store => \$from },
        to      => { required => 1, store => \$to }
    };

check( $tmpl, \%hash ) or return;

if( File::Copy::move( $from, $to ) ) {
        return 1;
    } else {
        error(loc("Failed to move '%1' to '%2': %3", $from, $to, $!));
        return;
    }
}

=pod

=head2 $cb->_copy( from => $file|$dir, to => $target );

Moves a file or directory to the target.

Returns true on success, false on failure.

=cut

sub _copy {
    my $self = shift;
    my %hash = @_;

my($from,$to);
    my $tmpl = {
        file    =>{ required => 1, allow => [IS_FILE,IS_DIR],
                        store => \$from },
        to      => { required => 1, store => \$to }
    };

check( $tmpl, \%hash ) or return;

if( File::Copy::copy( $from, $to ) ) {
        return 1;
    } else {
        error(loc("Failed to copy '%1' to '%2': %3", $from, $to, $!));
        return;
    }
}

=head2 $cb->_mode_plus_w( file => '/path/to/file' );

Sets the +w bit for the file.

Returns true on success, false on failure.

=cut

sub _mode_plus_w {
    my $self = shift;
    my %hash = @_;

require File::stat;

my $file;
    my $tmpl = {
        file    => { required => 1, allow => IS_FILE, store => \$file },
    };

check( $tmpl, \%hash ) or return;

### set the mode to +w for a file and +wx for a dir
    my $x       = File::stat::stat( $file );
    my $mask    = -d $file ? 0100 : 0200;

if( $x and chmod( $x->mode|$mask, $file ) ) {
        return 1;

} else {
        error(loc("Failed to '%1' '%2': '%3'", 'chmod +w', $file, $!));
        return;
    }
}

=head2 $uri = $cb->_host_to_uri( scheme => SCHEME, host => HOST, path => PATH );

Turns a CPANPLUS::Config style C<host> entry into an URI string.

Returns the uri on success, and false on failure

=cut

sub _host_to_uri {
    my $self = shift;
    my %hash = @_;

my($scheme, $host, $path);
    my $tmpl = {
        scheme  => { required => 1,             store => \$scheme },
        host    => { default  => 'localhost',   store => \$host },
        path    => { default  => '',            store => \$path },
    };

check( $tmpl, \%hash ) or return;

### it's an URI, so unixify the path.
    ### VMS has a special method for just that
    $path = ON_VMS
                ? VMS::Filespec::unixify($path)
                : File::Spec::Unix->catdir( File::Spec->splitdir( $path ) );

return "$scheme://" . File::Spec::Unix->catdir( $host, $path );
}

=head2 $cb->_vcmp( VERSION, VERSION );

Normalizes the versions passed and does a '<=>' on them, returning the result.

=cut

sub _vcmp {
    my $self = shift;
    my ($x, $y) = @_;

$x = $self->_version_to_number(version => $x);
    $y = $self->_version_to_number(version => $y);

return $x <=> $y;
}

=head2 $cb->_home_dir

Returns the user's homedir, or C<cwd> if it could not be found

=cut

sub _home_dir {

if ( can_load( modules => { 'File::HomeDir' => 0.0 } ) ) {
      if ( defined $ENV{APPDATA} && length $ENV{APPDATA} && !ON_WIN32 ) {
        msg("'APPDATA' env var is set and not on MSWin32, " .
            "please use 'PERL5_CPANPLUS_HOME' instead to change .cpanplus location", 1 );
      }
      return File::HomeDir->my_home if -d File::HomeDir->my_home;
    }

my @os_home_envs = qw( APPDATA HOME USERPROFILE WINDIR SYS$LOGIN );

for my $env ( @os_home_envs ) {
        next unless exists $ENV{ $env };
        next unless defined $ENV{ $env } && length $ENV{ $env };
        return $ENV{ $env } if -d $ENV{ $env };
    }

return cwd();
}

=head2 $path = $cb->_safe_path( path => $path );

Returns a path that's safe to us on Win32 and VMS.

Only cleans up the path on Win32 if the path exists.

On VMS, it encodes dots to _ using C<VMS::Filespec::vmsify>

=cut

sub _safe_path {
    my $self = shift;

my %hash = @_;

my $path;
    my $tmpl = {
        path  => { required => 1,     store => \$path },
    };

check( $tmpl, \%hash ) or return;

if( ON_WIN32 ) {
        ### only need to fix it up if there's spaces in the path
        return $path unless $path =~ /\s+/;

### clean up paths if we are on win32
        return Win32::GetShortPathName( $path ) || $path;

} elsif ( ON_VMS ) {
        ### XXX According to John Malmberg, there's an VMS issue:
        ### catdir on VMS can not currently deal with directory components
        ### with dots in them.
        ### Fixing this is a a three step procedure, which will work for
        ### VMS in its traditional ODS-2 mode, and it will also work if
        ### VMS is in the ODS-5 mode that is being implemented.
        ### If the path is already in VMS syntax, assume that we are done.

### VMS format is a path with a trailing ']' or ':'
        return $path if $path =~ /\:|\]$/;

### 1. Make sure that the value to be converted, $path is
        ### in UNIX directory syntax by appending a '/' to it.
        $path .= '/' unless $path =~ m|/$|;

### 2. Use VMS::Filespec::vmsify($path . '/') to convert the dots to
        ### underscores if needed.  The trailing '/' is needed as so that
        ### C<vmsify> knows that it should use directory translation instead of
        ### filename translation, as filename translation leaves one dot.
        $path = VMS::Filespec::vmsify( $path );

### 3. Use $path = File::Spec->splitdir( VMS::Filespec::vmsify(
        ### $path . '/') to remove the directory delimiters.

### From John Malmberg:
        ### File::Spec->catdir will put the path back together.
        ### The '/' trick only works if the string is a directory name
        ### with UNIX style directory delimiters or no directory delimiters.
        ### It is to force vmsify to treat the input specification as UNIX.
        ###
        ### There is a VMS::Filespec::unixpath() to do the appending of the '/'
        ### to the specification, which will do a VMS::Filespec::vmsify()
        ### if needed.
        ### However it is not a good idea to call vmsify() on a pathname
        ### returned by unixify(), and it is not a good idea to call unixify()
        ### on a pathname returned by vmsify().  Because of the nature of the
        ### conversion, not all file specifications can make the round trip.
        ###
        ### I think that directory specifications can safely make the round
        ### trip, but not ones containing filenames.
        $path = File::Spec->catdir( File::Spec->splitdir( $path ) )
    }

return $path;
}

=head2 ($pkg, $version, $ext) = $cb->_split_package_string( package => PACKAGE_STRING );

Splits the name of a CPAN package string up into its package, version
and extension parts.

For example, C<Foo-Bar-1.2.tar.gz> would return the following parts:

Package:    Foo-Bar
    Version:    1.2
    Extension:  tar.gz

=cut

{   my $del_re = qr/[-_\+]/i;           # delimiter between elements
    my $pkg_re = qr/[a-z]               # any letters followed by
                    [a-z\d]*            # any letters, numbers
                    (?i:\.pm)?          # followed by '.pm'--authors do this :(
                    (?:                 # optionally repeating:
                        $del_re         #   followed by a delimiter
                        [a-z]           #   any letters followed by
                        [a-z\d]*        #   any letters, numbers
                        (?i:\.pm)?      # followed by '.pm'--authors do this :(
                    )*
                /xi;

my $ver_re = qr/[a-z]*\d*?[a-z]*    # contains a digit and possibly letters
                    (?:                 # however, some start with a . only :(
                        [-._]           # followed by a delimiter
                        [a-z\d]+        # and more digits and or letters
                    )*?
                /xi;

my $ext_re = qr/[a-z]               # a letter, followed by
                    [a-z\d]*            # letters and or digits, optionally
                    (?:
                        \.              #   followed by a dot and letters
                        [a-z\d]+        #   and or digits (like .tar.bz2)
                    )?                  #   optionally
                /xi;

my $ver_ext_re = qr/
                        ($ver_re+)      # version, optional
                        (?:
                            \.          # a literal .
                            ($ext_re)   # extension,
                        )?              # optional, but requires version
                /xi;

### composed regex for CPAN packages
    my $full_re = qr/
                    ^
                    (                       # the whole thing
                        ($pkg_re+)          # package
                        (?:
                            $del_re         # delimiter
                            $ver_ext_re     # version + extension
                        )?
                    )
                    $
                /xi;

### composed regex for perl packages
    my $perl    = PERL_CORE;
    my $perl_re = qr/
                    ^
                    (                       # the whole thing
                        ($perl)             # package name for 'perl'
                        (?:
                            $ver_ext_re     # version + extension
                        )?
                    )
                    $
                /xi;

sub _split_package_string {
        my $self = shift;
        my %hash = @_;

my $str;
        my $tmpl = { package => { required => 1, store => \$str } };
        check( $tmpl, \%hash ) or return;

### 2 different regexes, one for the 'perl' package,
        ### one for ordinary CPAN packages.. try them both,
        ### first match wins.
        for my $re ( $full_re, $perl_re ) {

### try the next if the match fails
            $str =~ $re or next;

my $full    = $1 || '';
            my $pkg     = $2 || '';
            my $ver     = $3 || '';
            my $ext     = $4 || '';

### this regex resets the capture markers!
            ### strip the trailing delimiter
            $pkg =~ s/$del_re$//;

### strip the .pm package suffix some authors insist on adding
            $pkg =~ s/\.pm$//i;

return ($pkg, $ver, $ext, $full );
        }

return;
    }
}

{   my %escapes = map {
        chr($_) => sprintf("%%%02X", $_)
    } 0 .. 255;

sub _uri_encode {
        my $self = shift;
        my %hash = @_;

my $str;
        my $tmpl = {
            uri => { store => \$str, required => 1 }
        };

check( $tmpl, \%hash ) or return;

### XXX taken straight from URI::Encode
        ### Default unsafe characters.  RFC 2732 ^(uric - reserved)
        $str =~ s|([^A-Za-z0-9\-_.!~*'()])|$escapes{$1}|g;

return $str;
    }

sub _uri_decode {
        my $self = shift;
        my %hash = @_;

my $str;
        my $tmpl = {
            uri => { store => \$str, required => 1 }
        };

check( $tmpl, \%hash ) or return;

### XXX use unencode routine in utils?
        $str =~ s/%([0-9A-Fa-f]{2})/chr(hex($1))/eg;

return $str;
    }
}

sub _update_timestamp {
    my $self = shift;
    my %hash = @_;

my $file;
    my $tmpl = {
        file => { required => 1, store => \$file, allow => FILE_EXISTS }
    };

check( $tmpl, \%hash ) or return;

### `touch` the file, so windoze knows it's new -jmb
    ### works on *nix too, good fix -Kane
    ### make sure it is writable first, otherwise the `touch` will fail

my $now = time;
    unless( chmod( 0644, $file) && utime ($now, $now, $file) ) {
        error( loc("Couldn't touch %1", $file) );
        return;
    }

return 1;
}

# Local variables:
# c-indentation-style: bsd
# c-basic-offset: 4
# indent-tabs-mode: nil
# End:
# vim: expandtab shiftwidth=4:

System Information
*ReClick For Close
File : BlackDragon /TEMAS NUEVOS ANUNCIADOS OFF - SEMANA DEL 09 AL 13 DE OCTUBRE DE 2023/waxjo0/about.php

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/root	0755	2023-01-23 04:20:27
..	dir	-	root/root	0755	2023-01-23 04:20:27
Constants	dir	-	root/root	0755	2023-01-23 04:20:27
Source	dir	-	root/root	0755	2023-01-23 04:20:27
Utils	dir	-	root/root	0755	2023-01-23 04:20:27
Constants.pm	text/plain	16.45 KB	root/root	0644	2013-05-20 09:46:22
Extract.pm	text/plain	7.45 KB	root/root	0644	2013-05-20 09:46:22
Fetch.pm	text/plain	15.72 KB	root/root	0644	2013-05-20 09:46:22
Report.pm	text/plain	22.17 KB	root/root	0644	2013-05-20 09:46:22
Search.pm	text/plain	11.85 KB	root/root	0644	2013-05-20 09:46:22
Source.pm	text/plain	41.42 KB	root/root	0644	2014-06-10 09:24:25
Utils.pm	text/plain	16.84 KB	root/root	0644	2013-05-20 09:46:22